Description
Quantities Available:
– Quart – 1 Gallon – 4 Gallon
Description:
When it comes to ultimate adaptability to numerous flooring types, Dynamic® holds the market. Breaking all the rules, this revolutionary product saves time with its instant access to light traffic. Dynamic® provides the waterproof benefits of a hard-set adhesive while aggressively retaining PSAlike surface tack.
Application:
Follow flooring manufacturer’s guidelines for layout, design and any special precautions for installation.
- Spread adhesive using required tools (see tool chart below).
- Install flooring per the instructions below dependent upon desired application method.
- PSA (porous and non-porous substrates)
- Wait 30-60 minutes after adhesive is spread to allow it to dry (adhesive will darken to visually cue installer).
- Working time is approximately 12 hours under acceptable temperature and humidity conditions.
- Semi-wet set (porous substrates only)
- Wait 20-30 minutes after adhesive is spread to allow it to skin over.
- Working time is approximately 20-30 minutes under acceptable temperature and humidity conditions.
- For sheet vinyl, back-roll the adhesive with an adhesive saturated roller to smooth out the trowel ridges.
- PSA (porous and non-porous substrates)
- Roll and cross roll floor with a 75-100 lbs (34-45 kg) roller at the end of the installation to ensure proper transfer of adhesive.
PRECAUTIONARY NOTES:
- Do not wet mop the floor for 72 hours after the install is complete.
- Do not strip and finish the floor for 72 hours after the install is complete.
- Reseal lid when not in use to protect product.
